Advanced Damp Ltd is an approved member of the Federation of Damp, licence FOD-20003Newton Approved InstallerCHAS AccreditedLong-term written guarantee
Thermal image showing a cold bridge around an entrance door in a Marlow flat, SL7
Condensation Case Study

Condensation and Mould in a Flat on Chalfont Court, Marlow SL7

A flat at Chalfont Court in Marlow had mould in the entrance hall and around window and door reveals. The owners were worried about rising damp, but the survey found something different.

Project at a Glance

Location
Chalfont Court, Marlow, SL7
Issue
Mould in the entrance hall and reveals
Cause
Condensation from thermal bridging and intermittent heating
Treatment
Mould wash and external fillet seal
Surveyor
Lionel Sewell (FODCS)
Time on site
One day

The Brief

The owners wanted to know whether the mould meant damp was coming into the flat.

The Survey

After a full internal and external check, no rising damp or structural moisture was affecting the living areas. The main cause was condensation, from local thermal bridging at the entrance door, low surface temperatures and intermittent heating.

A separate, minor issue was found outside at the stairwell, where a small structural junction crack was letting in a little moisture, though not affecting the internal walls.

The Solution

Proportionate measures:

  • Clean the affected areas with a mould treatment wash.
  • Seal the external junction crack with a fillet seal.
  • Improve the entrance door and bathroom extraction, and keep heating more consistent.

The Work

The mould wash and fillet seal were completed in one day in September 2026.

Thermal image showing a cold bridge around an entrance door in a Marlow flat, SL7
Mould and surface reading in a flat entrance hall in Marlow, SL7

The Result

The owners avoided unnecessary damp proofing and got advice aimed at the real cause. See our page on damp proofing in Marlow, or read about mould removal.

Frequently Asked Questions

Is mould by my front door rising damp?

Usually not. Doors and frames can be thermal bridges where condensation forms first.

What is thermal bridging?

A part of the building that conducts heat out faster than the rest, creating a cold spot where moisture condenses.

Will a mould wash fix the problem?

It removes the mould, but heating, ventilation and cold spots must be addressed to stop it returning.

Mould in a flat?

Our CSSW and CSRT trained surveyors find the real cause before recommending any work. Non-invasive survey with a clear written report. No obligation.

Book a Damp Survey

Survey carried out by Lionel Sewell (FODCS) at Advanced Damp. Project completed in Marlow, SL7.

Dealing with damp or water in your property?

A survey from our qualified surveyors gives you the real cause, not guesswork, and a fixed-price quote.

Related Posts

Related Case Studies

Table of Contents

Book a survey

Get to the Cause, Not the Symptom

Our qualified surveyors diagnose the real problem and give you a fixed price.

Book a Survey 0300 373 7251Speak to a specialist

Free 60-Second Damp Checker

Not sure what you are dealing with? Answer a few quick questions for an instant, no-obligation assessment.

Try the free checker →

Why Advanced Damp

Newton Approved Installer FODCS certified surveyors Member of the Federation of Damp CHAS accredited & fully insured Long-term written guarantee

Not sure what is causing your damp?

A CSSW and CSRT trained surveyor will find the cause and give you a clear written report with photos.

Book a SurveyCall 0300 373 7251Non-invasive survey with a clear written report. No obligation.